扫描网络文件时出现问题

网络路径未显示在扫描对话框中

在某些网络环境中，添加位置 > 网络 > Microsoft Windows 网络将无法显示本地网络上的任何服务器。要解决此问题：

  1. 打开 Windows 资源管理器
  2. 导航到 LAN 上包含音乐的共享文件夹
  3. 从 Windows 资源管理器地址栏复制完整路径（例如 \192.168.0.2\data 或 \NAS\data）
  4. 在 Windows 上打开 MediaMonkey
  5. 点击文件 -> 添加/重新扫描文件到库 -> 添加位置 -> 网络
  6. 将步骤 3 中复制的路径粘贴到文本框中，然后单击“添加”
  7. 展开以显示服务器上的其他文件夹，并选中您要扫描的文件夹
  8. 点击扫描
返回顶部

扫描映射驱动器失败

在某些情况下，尝试扫描映射驱动器将无法正常工作，并且可能会导致文件扫描后变灰或扫描失败，尽管之前的扫描成功。如果 Windows 更改与映射驱动器关联的驱动器 ID，则可能会发生这种情况。解决方法是使用完整的网络路径。

返回顶部

Applies to: ,

Translated automatically (see original)

Problems Scanning Networked Files

Networked paths don’t appear in the Scan dialog

In some network environments, Add Location > Network > Microsoft Windows Network will fail to display any servers on the local network. To work around this:

  1. Open Windows Explorer
  2. Navigate to a Shared Folder containing music on the LAN
  3. Copy the full path from Windows Explorer Address bar (e.g. \192.168.0.2\data or \NAS\data)
  4. Open MediaMonkey for Windows
  5. Tap File -> Add/Rescan Files to Library -> Add Location -> Network
  6. Paste the Path copied in step 3. into the text box and click ‘Add’
  7. Expand to show other folders on the server, and check those you’d like to scan
  8. Click Scan
Back to Top

Scanning Mapped Drives Fails

In some cases, attempts to scan a mapped drive will not work correctly and may result in files scanning only to later get greyed out or fail to scan even though an earlier scan worked. This can occur if Windows changes the Drive ID associated with the mapped drive. The workaround is to use full network paths.

Back to Top

Applies to: ,

Hide original

这篇文章有帮助吗？